hymness1

Fixed stepper_y positions and added BED_MESH_CALIBRATE in print_start

1

Actual config file put X0 Y0 outside the bed. I talk about this here : https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/hymness1/Quickdraw_probe_Voron_Switchwire/Klipper_Macros#about-the-modded-keybak-mount-and-the-endstop-microswitch-located-at-z_min-or-sensorless-homing-at-z_min-and-y-travel This fix should put Y0 on the bed, just over the 2 little holes...