Loïc Yhuel

On arm, `_Unwind_GetIPInfo` is defined inline in `unwind-arm-common.h` (as a stub) for gcc. The symbol is not present in libgcc (except for FreeBSD). But both clang and libunwind (www.nongnu.org/libunwind) have...

It's an older device, but it's likely to use `ONTUSER:SUGAR2A041` for SSH or telnet too. The web interface is probably either `adminadmin:ALC#FGU`, or `AdminGPON:ALC#FGU`. But the passwords could be changed...

AFAIK there is no specific VLAN setting on the SFP, it follows what the OLT asks using OMCI. From what we saw with Orange France, there could be several issues...

I don't know what the different profiles change on the UF-Loco. It might be MIB files, but unlike G-010S-A / MA5671A and others we can't change them on G-010S-A (at...

`NOT VALID` only means a field is not requested or not sent, so usually it isn't an issue. `oltinfo: vendor:HWTC,olt type:1,relInfo:31300000` So it's a Huawei OLT. In the OMCI log,...

There is now the `3FE46398BGCB22` firmware, which should fix the issues with Huawei OLTs (at least it does for me).

@chomba `update_env_flag 1` should set `next_active=1` and `commit=1`, so something is strange. Can you check the values (with `upgradestatus` for example) just after the command, to check if the values...

> Any idea why this is happening? Everything seems normal, so unless something is interfering (writing to the `magic_addr`/`act_img_addr` locations, the bootloader should switch to image1. Do you do everything...

The padding behavior is quite inconsistent... How do you get the final OMCI result ? Which firmware do you use ? From `ritool set` / `ritool get`, it seems :...

The `omcimsg.txt` is referenced in the `parser` binary of all versions. Perhaps there is a command to enable it. If your issue with ritool on 3FE46398BGCB22 is `not allow to...