Dieter
Dieter
I have also that issue. If I compile myself or use the https://sourceforge.net/projects/lmsclients/files/squeezelite/linux/ Bins. After a while I get bad sound quality and it sounds like an old Gramophone. Any...
Diese 0 Werte gibt es tatsächlich, ich habe lange damit herum experimentiert Der Zusammenhang sieht wie folgt aus... Je schlechter der Empfang zwischen DTU und Inverter um so häufiger kommen...
@tbnobody Du hast wohl recht, es liegt am DTU-Pro. Ich haben mal vom Strom genommen, und es kommen seit 3 Stunden selbst mit schlechtem Empfang keine 0-er mehr. Jetzt muss...
Nochmal zu Bestätigung... Ich habe seit heue morgen keinen 0-Wert mehr bekommen, sobald ich den DTU jetzt wieder in Betrieb habe, kommen wieder vereinzelt die 0-er. Zwar nach wie vor...
You are my hero ;) Work well. Thanks.
@Selaron I can confirm this. The display stays with the old value. Also reading the set value was a bit difficult. You only get a % value, but this %...
Big thanks for your help!
Good moring @shogunxam, thanks for you fast response. The continuous scan is good as it is. My need is... - I start different action by entering the house or garage,...
Thanks ! Will try it, and come back.
on=1 turned on the scan off=1 turn off, but than starts spamming MQTT with a lot of messages. Will have a closer look this days.