Jimmy Ririe
Jimmy Ririe
Would also recommend updating [the Wiki](https://github.com/binsync/binsync/wiki) to point to binsync.net.
Sub-issue: https://github.com/binsync/binsync/issues/429
Correction: since this bug also occurs in the Ardupilot project, which has a base address of only 0x4000, it's not that _large_ base addresses are handled improperly but that any...
Tiffany and others suggested loading the file in Binja with a base address of 0x0 and a segment start address of 0x800_0000. I tried this and was still unable to...
Found a workaround for Binja: add an empty segment from 0x0 the start address: - Click on the memory map (left panel, top half) - Right click in the empty...
Maybe structs aren't yet fully supported? https://github.com/binsync/binsync/issues/316
@CX330Blake click and drag upon the six dots separating the BinSync and Cross References panel. Or right-click on the BinSync icon in the sidebar and make it floating or windowed...