Henrik J. Koch
Henrik J. Koch
So where do i find the CAD source files (not the STL's) :-)
I agree on that suggestion. In that way you can have an overview of all the printer filament that you have laying around. With tags like material (ABS, ASA, PLA...
I maybe have some more info. It looks like the bug is there right after the new component has been created. Just after import (creation) of new part Search for...
I created this: "1N5408G_R2_00001" from TME Right after import I searched for "1N5408G_R2_00001" and this was not found in the 1.10 But again I believe it is something that is...
Can you somehow see the value of your whole inventory (I mean the total amount/value)?
Is it noise on the control signals (DIR and EN) for the stepper motor controllers that are being "killed" by these 10nF capacitors? And Will this change accomplish silence in...
So do you mean. When it is noisy - then it's because some signals gets lost? The two 8 bit shift registers "only" control Direction signal and Enable signals for...
I have placed the 100nF between pin 16 and 13 as well on both U2 and U9. No change at all in the noise. !00nF and not 10nF should not...
Changed to ceramic 10nF. Still you can hear noise when idle on the steppers for the MMU2 
If I write the whole new string ex. "Mechanincs -> Connectors -> SMD" then iit works But if "Mechanic-Connectors" were already there and I TAB'ed me through this to show...