Harold

@kluszczyn> > I can confirm, that multi-shutters setup based on @marvinroger example is working without problems in my case (11 shutters, arduino mega, mysensors framework for communication). Hi. Any chance...

@kluszczyn Thanks very much for responding. Did you find a working multi shutters library in esphome.io to replace @marvinroger 's library which work with percentage opening ? The given example...

I wasn't very explicative, but as you can guess, I'm playing with Raspberry Pi's. So I have some micro SD card that don't work properly (I only use these card...

Hi and thanks to take the time for helping. I use Balena Etcher to flash the OS on the card. I also had the same problem trying with dd, so...

I ran f3write/read but didn't keep the output; but it didn't show anything wrong from my understanding. Actually, I have 3 card with same problem, and these card have been...

Can't I get any more help ? Despite having problem with SD card, I never had f3 complaining about something. I wonder if I'm using it right.

I was asking where 're you from beacause your name sound lie French and I was wondering if I could easily send the suspicious SD card for expertise. Sorry if...

Here is the result of f3write/read. As yo can see, no errors ! harold@harold-ThinkPad-T530:/media/harold$ f3write disk/ F3 write 7.0 Copyright (C) 2010 Digirati Internet LTDA. This is free software; see...

I think I've solve my SDcard problem/failure. I was using them on Raspberry pi and since I've replaced the power supply and buy a new card, it's been working ok...

Going that way, as supposed, I got : > pi@raspberrypi:~/IOTstack $ docker-compose up -d nodered is up-to-date portainer is up-to-date mosquitto is up-to-date grafana is up-to-date pihole is up-to-date Recreating...