hanyazou

Today I tested this dd modification on latest macOS (10.13) and latest Arduino IDE (1.8.5). I had thought that the dd mod may not be required on the latest OS....

I added one more wait loop after upload-reset (0c9aab8) because I found that the new macOS required longer duration to list the target device. I tried various wait argument 750,...

@victorpv thank you for the comment. I've used 'git rebase' on the branch on Oct 22. The rebase took many commits from the master into my branch. I re-created branch...

Thank you for your contribution. Because I don't have any time to test your code for now, I'm not sure if your code run on BMI160 w/o BMI150. Did you...

I don't try the 3-wire mode. But the datasheet says that: 3.2Primary Interface Table 25: Mapping of the primary interface pins Pin #1 SDO is DNC (float) in SPI 3-wire...

I found this tutorial. This may help you. Arduino/Genuino 101 CurieIMU Orientation Visualiser https://www.arduino.cc/en/Tutorial/Genuino101CurieIMUOrientationVisualiser

I found that Adafruit had added nRF52840 and pca10056 support in their fork https://github.com/adafruit/Adafruit_nRF52_Arduino.

Some people, including me, can run without errors. But others cannot... At least, I tested on MacOS 10.13 and ubuntu 16.04. Are you using Windows?

I am not familiar with Windows. Did you check where mplayer executable file and dynamic link libraries are? Did you try to add those path to your environment variables?

DJI official SDK seems have the commands which you are looking for. https://dl-cdn.ryzerobotics.com/downloads/tello/20180910/Tello%20SDK%20Documentation%20EN_1.3.pdf Unfortunately, the tellopy can not send the commands to the drone because the tellopy switched the drone...