Hans Liss
Hans Liss
> When the cable is not too long, this could probably work. But you need to find a way to connect it so that the pins are not mixed up....
Excellent! Thanks! I will include this in my upcoming PCB order.
Nice work! Thanks! I'll include this in the next PCB order and give it a go.
I ordered PCBA cards from JLCPCB and they look really good. I used 74LVC574APW, 74LVC86APW,118 and TLV74333PDBVR from LCSC - I had to solder on the voltage regulator myself since...
@c0pperdragon Thanks for checking! I think the CDAC signal might be the problem, after all. The thing is, judging from the schematics for the A1000, on which my ancient German...
> @hansliss > > A flashing screen usually means the sync timing doesn't match any of the available profiles. > What software version are you using? > > The latest...
> @c0pperdragon Thanks for checking! I think the CDAC signal might be the problem, after all. The thing is, judging from the schematics for the A1000, on which my ancient...
> Hmm, this could really mean that the very early model versions did not have the _CDAC signal connected to the Denise socket. > I am not sure where you...
> Hmm, this could really mean that the very early model versions did not have the _CDAC signal connected to the Denise socket. > I am not sure where you...
> Hmm, this could really mean that the very early model versions did not have the _CDAC signal connected to the Denise socket. > I am not sure where you...