Hannes
Hannes
I experienced this issue under macOS. The sample code worked for Android. The sample code is however not a complete compliant BLE HID device. There is a lot of stuff...
Afaik "Known" Services are only those defined by the Bluetooth standard, i.e. the Bluetooth SIG assigned numbers (https://www.bluetooth.com/de/specifications/assigned-numbers/). You can however set the device name (BLEPeripheral::setDeviceName()), which is the device...
A stab in the dark: Have you tried compiling with `-DCMAKE_POLICY_DEFAULT_CMP0068=NEW`?
Did you capture that trace with or without the tip connected/on?
Ok. If I see that right, the oszillations have a frequency of rougly 3 kHz. Does that track with the PWM frequency of the otter iron?
I'll preface my answer by saying that I'm not a lawyer. Sorry to be blunt, but I think that uskis reasoning is ridiculous. By that logic you couldn't redistribute Linux...
Hey! No, I haven't kept the code I don't think. It's pretty easy though.
Hey Eugenio, R usually designates resistors, not capacitors. According to the schematic R39 has a value of 10k. Run-of-the mill resistors usually have a voltage rating of 50V, which is...
Hey, No problem. I had a look at the schematic again. In my opinion C45 is optional, unless you're having problems with your end stop, like "ghost triggering", when your...