hanifsuandy

That would mean that it has nothing to do with my pairing it and performing the OTA update prior to it being supported.

Hoping someone has an idea about errors relating to ```z2m: No converter available for 'state_l1' ("ON")``` so that I can do my own troubleshooting. I have had no experience with...

Sorry, finally found time to do a bit of troubleshooting. > const {} = require('zigbee-herdsman-converters/lib/modernExtend'); > // Add the lines below > const fz = require('zigbee-herdsman-converters/converters/fromZigbee'); > const tz =...

https://github.com/Koenkk/zigbee2mqtt/issues/23402#issuecomment-2466849945 I can also confirm that I have the same issue as @beginner2047 with the mosquitto_pub command.

> It seems that the endpointName defined l1 and l2. However, the device is only left and right for the endpointName. In issue#22981, the endpointName is also left and right....

@sleepypig2003 after the fix, are you able to control the switches individually? In my case, every time I turn one on or off, the other one will follow.

Thanks @Koenkk! I can control the sockets separately now. However, I have another issue. I have 3 of these devices and only 1 of them has an Energy reading while...