hali9

@mistyk The default value 0 have this behavior, but this is very inaccurate. A 10 degree deviation at 150 meters approach is 26 meters drift. > that case land direction...

Hello @qba667. Thank for respond. This post refers to 10ch_Timer_MOD_i6_Programmer_V1_4 and this soft support only a few additional useful ids (like alt). Currently I use 10ch_Mavlink_MOD_i6_Programmer_V1. This solutions is very...

I didn't try skip_AD_request.bin. I cannot flash it. I can test it, but I need updater like 10ch_Mavlink_MOD_i6_Programmer_V1.exe, because I have Flysky data cable (http://www.banggood.com/FlySky-Data-Cable-USB-Download-Line-For-FS-i6-FS-T6-Transmitter-Firmware-Update-p-982289.html?rmmds=search). Thom updater not work for...

I managed to upload multiSensor_updater_01_11_18_21.bin using ThomHPL/BaseI6_updater by Flysky data cable. This not work on WinXP, and not work on Win7. Open port succesed, but when "Detecting ..." the TX...

I tested multiSensor_updater_01_11_18_21.bin, it is work well. But font on main screen are too small (cannot read when fly), should be standard font.

Publish wersion 5x7 if You can. I can test it. I did not notice any strange behavior. Formating is as I write above, repetition to organize: Format: Current sensor should...

Yes @qba667 , because for representing LON or LAT is need 4 byte. And Flysky telemetry supports only 2 byte value. This is enough for all sensor but not for...

@qba667 Can You publish version from this photo ? https://github.com/cleanflight/cleanflight/issues/1125#issuecomment-269458664

I don't think that it is problem with driver. I flashed firmware 10ch_Mavlink_MOD_i6_Programmer_V1_.exe from https://github.com/benb0jangles/FlySky-i6-Mod- on this same computer with this same wire and driver and it works. I thought...

There is what I get, error is inside WriteFile:    ecdc_appcompat.txt ``` ```