Michael

I have the SDcard formatted in Fat32, but it doesn't seem to get to that point, it's not mounting the card because it can't see the card

Yes, I have used both my 5v rail and my 3.3v rail to power the unit, at different times since I thought it might not be receiving enough power on...

I confirmed power and I am still having issues with accessing the SD card. Any suggestions?

''' This is version 0.9a of the PM Monitor program. Data is stored a SD Card. ''' import machine from machine import Pin,UART import time import bme280 from lib import...

It's still good because I was using it today to move files from one computer to another On Mon, Mar 13, 2023, 12:00 Andrew Leech ***@***.***> wrote: > If 5v...

I have tried multiple SD card reader modules, same error, I have confirmed the wiring multiple times and had a second person check it. I got the library from this...

I doubt it's the SD card because I have used this one before with this spi module SanDisk Industrial 8GB Micro SD... https://www.amazon.com/dp/B085GL8XBH?ref=ppx_pop_mob_ap_share On Mon, Mar 13, 2023, 12:30 Andrew...

(sysname='rp2', nodename='rp2', release='1.19.1', version='v1.19.1 on 2022-06-18 (GNU 11.2.0 MinSizeRel)', machine='Raspberry Pi Pico with RP2040') I have multiple other modules that work fine, the only issue I am having is with...

I am using the following pins: pin 21 = GP16 =MISO pin 22 = GP17 = CS pin 24 = GP18 = SCK pin 25 = GP19 = MOSI I...

That was fixed and still getting the same error On Wed, Mar 15, 2023, 08:44 Andrew Leech ***@***.***> wrote: > That looks like the issue then! > In your code...