habazut
habazut
If you change the behaviour of how the default CC is found, please make it consistent among all the k* commands and check that the behaviour is like the manual...
I heared that there are CS (Roco Maus2 for example) which when you operate a turnout first send the command with C=1 (coil on) and then some ms later to...
Capabilities that can be interresting for the higher level program, for example JMRI. # of slots is one such capability. Has RailCom feedback another. Mhz and RAM are not interresting...
> Would it be an option to build 2 versions? I would not prefer it, because the enduser has to decide which to download. It makes the decision more complicated....
That would need a different hardware setup because the output must be in sync with the input. I doubt that the Arduino can do that in software. A fast optocoupler...
There is not "the" standard for throttles. I think these are the major players: * X-Bus (Multimaus) * LocoNet (Digitrax and other license holders) * Z21 (LAN/Wifi protocol to the...
I am quite positive that the patch is not doing what you think it does as you are mixing up the concept of stopping the loco when the hearbeat goes...
> When EngineDriver ask for informations with the message M0A*qV↵M0A*qR, the locoAction() place the broadcastPending flag to true for each loco. And checkHeartBeat() is the only place where this flag...
If you want to continue with the ESP32, please look what has been done on the PORTX_HAL branch. It has received a lot of WiThrottle fixes lately. Harald.
Ok, I see no reaction (1 week). Harald.