Gunnar

+1 - I just soldered a board and want to wire it up, but have no idea which wire goes where

@WojciechOchman, I simply used a multimeter to check for a short, connecting pin and lead. If that helps, months later ;)

Also very interested in trying this out. A programmer is on its way to me. This is apparently not loved by anytone, as a discussion regarding this option was censored...

> If you're referring to the [AnyToneDMR Facebook group](https://www.facebook.com/groups/AnyToneDMR/), don't blame AnyTone for deleting any comments. The group isn't run by [Qixiang Electron Science Technology Co. Ltd](http://www.anytone.net/) (the AnyTone manufacturer),...

My programmer arrived, I'm ready to help try out the package, @bizart

Looks like we others can give this a try. Where could we find a Firmware package for upload? A new Firmware was released recently. If these files are only shared...

> The firmware release 1.10 also contains the necessary Icon Update files so DL2MF's External Flash Dump is no longer essential. Does this mean we can use the vanilla 1.10...

I'm now in the process of dissembling the device. Should one lift out the metal baseplate or does the top plastic part above the battery cover still need to be...

> @Gymnae and others wanting to try this, please see [here ](https://www.qsl.net/dl4yhf/Anytone_D868UV/index.html)for some disassembly instructions, be very careful though. Thank you, now it's open. Being careful is important, the ribbon...

Success! Thanks everybody who worked on this. This is great. Here are the steps which I took: 1. Open the device with the help of these images: https://www.qsl.net/dl4yhf/Anytone_D868UV/index.html#photos (thanks @doronbc...