guy426

My network server is Chirpstack This is an example of decoded packet: {"tst":"2023-09-27T10:57:15.161510+0200","topic":"application/9e548d1d-37cb-43fc-8231-25bfe45508f3/device/685b00ff4c1f9511/event/up","qos":0,"retain":0,"payloadlen":1436,"payload":{"deduplicationId":"a7fed1c4-6243-44af-9310-f3f4e3e3eb00","time":"1980-01-21T23:17:20.234+00:00","deviceInfo":{"tenantId":"52f14cd4-c6f1-4fbd-8f87-4025e1d49242","tenantName":"ChirpStack","applicationId":"9e548d1d-37cb-43fc-8231-25bfe45508f3","applicationName":"counter","deviceProfileId":"408f84b7-f359-4995-8fb7-1a70f0f12f85","deviceProfileName":"device_profile","deviceName":"dev3","devEui":"685b00ff4c1f9511","deviceClassEnabled":"CLASS_A","tags":{}},"devAddr":"010da236","adr":true,"dr":0,"fCnt":183,"fPort":1,"confirmed":false,"data":"dGVzdDMgMjAgc2Vjb25kaQ==","object":{"cmd":"test3 20 secondi"},"rxInfo":[{"gatewayId":"285bd82c7d76e7e1","uplinkId":50925,"time":"2023-09-27T08:57:14+00:00","timeSinceGpsEpoch":"1379840.234s","rssi":-60,"snr":7,"channel":1,"location":{"latitude":43.735555660125584,"longitude":10.95216751098633,"source":"GPS"},"context":"ZRPuag==","metadata":{"region_config_id":"eu868","region_common_name":"EU868"},"crcStatus":"CRC_OK"},{"gatewayId":"4645c2a5de7dfb99","uplinkId":58674,"time":"2023-09-27T08:57:14+00:00","timeSinceGpsEpoch":"1379840.234s","rssi":-60,"snr":7,"channel":1,"location":{"latitude":43.724019581115016,"longitude":10.949935913085939,"source":"GPS"},"context":"ZRPuag==","metadata":{"region_config_id":"eu868","region_common_name":"EU868"},"crcStatus":"CRC_OK"}],"txInfo":{"frequency":868300000,"modulation":{"lora":{"bandwidth":125000,"spreadingFactor":12,"codeRate":"CR_4_5"}}}}}

Drive motor and head runnning ok, but medium always reports "Not inserted" and Button "OK" is not enabled. Floppy, driver and interface works well with any other software.

I'm wrong green led is on, head move, but drive motor is not start

Debugging code: TStdWinError CGreaseweazleV4::SeekTo(TCylinder cyl) const{ if (const TStdWinError err=SelectDrive()) return err; if (const TStdWinError err=SetMotorOn()) // some Drives require motor to be on before seeking Heads return err; cyl

If I select drive 1 first then drive 0, disk running and floppy is detected. The cable is correct

My drive configuration is not particular, gw tools works well with default parameters correctly. Command line is: gw read xxx or gw read xxx --drive=A Drive is setting DS1 and...

Disk images work ok. I tested 4 different 3,5" drives, one works fine (Panasonic JU-257) the other 3 fail. All 4 drives work fine with gw tools

My connection is good I'm sure. Gw tools always work with my setup I capture command send to greaseweazle interface: Gw tools read chain: -GetInfo -SetBusType -Select -Motor On -Seek...