Nicolas

Hello, it seems to me that there is an error with Arduino serial sketch for calibration (for Teensy 3.2). The datas read by cal_gui.py are not correct until I replace...

Hello, Unlike 'width' which can be expressed in pixel or percentage, this does not seem possible for 'eight'. But if the 'direction' is up, that would be interesting.

Hello, I have a problem with MKR WIFI1010 and MKR1010 board with HT711SerialBegin example. When th HX711 board is not connected, application crashes. Of course, everything works well if the...

WakeUp with SERIAL1

1

I would like to put the MKR on sleep mode until a character arrives on SERIAL1 (pin 13-14). Do you think it's possible with ArduinoLowPower Library ?

[Wrong device]: MiBoxer FUT037Z+ is shown as Tuya TS0505B_1

5

### Link https://miboxer.com/fr/produit/controleur-led-3-en-1-zigbee-3-0-2-4g ### Model TS0505B_1 ### Description Contrôleur LED 3 en 1 (Zigbee 3.0 + 2.4G) ### Vendor MiBoxer ### Picture (link) https://miboxer.com/wp-content/uploads/a1-50.jpg ### Database entry {"id":2,"type":"Router","ieeeAddr":"0xa4c138f4a59f5e0f","nwkAddr":61911,"manufId":4417,"manufName":"_TZB210_417ikxay","powerSource":"Mains (single phase)","modelId":"TS0505B","epList":[1,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":269,"inClusterList":[3,4,5,6,4096,8,768,61184,0],"outClusterList":[25,10],"clusters":{"genBasic":{"attributes":{"stackVersion":0,"dateCode":""}},"lightingColorCtrl":{"attributes":{"colorCapabilities":29}},"genOnOff":{"attributes":{"onOff":1}}},"binds":[],"configuredReportings":[],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":64,"stackVersion":0,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"meta":{"configured":1842547789},"lastSeen":1709455071435}...