Graham Ross
Graham Ross
Your slave is reporting an illegal data address, I get a valid response from the Modbus Slave 
It looks like it no longer fits in the available memory I'll look into it this weekend...
Set versions for dependent libraries in platform.ini added include for spi.h
Thanks, I'll make sure I update that. Graham. On Jun 4, 2016 1:56 PM, "frankdunn" [email protected] wrote: > hi > ng > I have it working now , i had...
I would first make sure the MQTT messages are getting to the broker using mqtt.fx or mqtt explorer. if that's working then it's probably an issue with the telegraf configuration,...
The ESP version is in degrees C as is the Python version
You should be able to set the snooze_publish_rate to 5 seconds, the same value as the wake publish rate. https://github.com/ClassicDIY/ClassicMQTT/wiki/3.-Raspberry-Pi-Classic-MQTT-Publisher On Sat, Sep 4, 2021 at 1:46 AM Laurent Dinclaux...
Looks like your pi isn't detecting your USB to serial adapter try: ls -l /dev/serial/by-id 
Your RPI needs to be running the 64-bit version of the O/S , see comment in [https://github.com/linuxserver/Heimdall/issues/1176](url) 