gismo2004

This is most likely now a dumb question, but why do you build an external tool for something that could be contributed to immich directly? I am using immich on...

Thank you for the answer! That is very understandable now. About the PVC thingy: It's not impossible to mount it, and ofc it's possible to use it with your tool......

Yes that's what happens, but what brings the device/integration into this state? I am using the integration since quite some time now, and this happened now the second time. Both...

Connection shouldn't be my problem (Inverter offline at EVERY night and works perfectly since March), SD/Storage also very unlikely as HA is running on a Kubernetes cluster with ZFS. So...

I have checked some issues, but all I have seen was not really the same situation as mine. My assumption is, that the ECU is fine but since the inverter...

Thx for the replay! But what exactly is the issue? Even if the OTA is failing on my side, (which I assume not, as the current version is ECU_B_1.2.30 on...

No, and as I said, it works perfectly fine since the beginning of March. This problem only happened two times by now, and it seems to be always because of...

And what will be a good “higher number”? I mean, if the ECU don't like to respond correctly after an OTA until the inverter is online again (assumption) and this...

Ok, then I will try to set it to 50 because it can't be worse than “not working” :-) What do you mean by verifying data against EMA? I have...

Why would that be a requirement? ECU has internet connection according to EMA app which enables updates and such, but I am not registered somewhere.