gioreva

There are a document for how to configure ? Where I add "driver=rtlsdr" ? Additional parameter "--even --fft-window boxcar --remove-dc driver=rtlsdr" on "soapy_power" BackEnd This "soapy_power --detect" https://pastebin.com/EhTmNwXm C:\Program Files\PothosSDR\lib\SoapySDR\modules0.5-2\bladeRFSupport.dll...

installer

Removed and replaced pothos SDR It Cannot edit PATH, "too long" error. CubicSDR work well C:\Program Files\QSpectrumAnalyzer>soapy_power --detect Detected SoapySDR devices: No devices found! Zadig Driver is Ok

Ok, adding PATH, now Work But why Y is DB ? I cannnot measure value amplitude with the key ? (dbm or sd/uV) I've seen dBm screens, only with hackRF?

It worked a bit, now nothing appears. No crash. https://pastebin.com/dBxYVXMB I ordered hackRF, I need a spectrum analyzer for EMC measurements. But I need a calibrated measurement in dB/uV Also...

For calibrating input, I'm looking for a calibrated generator. To calibrate the output, just connect input with output, you make a spam and analyze all frequency gain. But already so...

But you menage Output ? I do not understand what the setup parameters are

From https://github.com/mossmann/hackrf/wiki/HackRF-One Transmit Power HackRF One's absolute maximum TX power varies by operating frequency: 10 MHz to 2150 MHz: 5 dBm to 15 dBm, generally increasing as frequency decreases 2150...

What are this parameters ? Sample Rate. (On setup) Bandwith. (On setup) LNB LO: (On setup) Bin Size: (On Main)

Can you add Output panel for setup RF output of hack RF ? Frequency, amplitude, modulation. And funcion for calibration output amplitude, connecting output to input. What downloads is latest...