Giovanni

Hi, software interlock can't never be a safe and smart solution. Best way is to use an electrical interlock. Take a look here: https://github.com/Gio-dot/Six-shutters-ESP32-controller

> Hi! > I just jumped into the iot world and I discovered this small module because I was searching an alternative to the esp01, as it is a bit...

> Didn't compare time before and after changes, sorry. > > Something useful could be to find a way to execute a command only if configured, and skip if not...

Hi, i would like to delete values that are above a certain threshold; tried this query but surprisingly it delete ALL the values in the series. Why? 

> > > > The offline wake-up of su03t is very useful. I contacted the manufacturer and they expect to launch the WIFI+BLE version of voice recognition by the end...

To force a new pairing there are 3 ways: Option 1 CC253x: Re-flash firmware Option 2 CC2530: Power on, wait 2 seconds, power off, repeat this cycle three times. CC2531:...

I see 19200 in the plc serial configuration and 9200 in your code...

> I have a Z-Bee Duo Ser2net wifi adapter. how do i change the wifi configuration. I have to connect to a new wifi line. I tried the "reset" and...

> [21:58:10][D][number:054]: 'pvbrain_axpert_current_max_charging_current_number' - Setting number value [21:58:10][D][number:113]: New number value: 20.000000 [21:58:10][D][number:012]: 'pvbrain_axpert_current_max_charging_current_number': Sending state 20.000000 [21:58:10][D][pipsolar.output:015]: Will write: MCHGC020 out of value 20.000000 / 20 [21:58:10][D][pipsolar:856]: got command:...

Ok, i solved my issue.. look here: https://github.com/syssi/esphome-pipsolar/issues/41