ggsubs

The device is the Harmony Ultimate Hub: http://www.logitech.com/en-us/product/harmony-ultimate-hub?crid=60 FW version is 1.1.8, as above in the login response. The XMPP library is asmack-android-10-0.8.10.jar This call was failing: hubSessionConnection.login(hubIP, "[email protected]/gatorade.", "gatorade.");...

Message in kernel log: `ASP: Security policy would not allow process: xxxxx, /Applications/giada.app/Contents/MacOS/giada`

I suggest the following as the base template for Lombok: ``` @Data @Jacksonized @Builder class GenericPojo { //private AnyType anyMappedProperty; @JsonAnySetter @Singular("any") private Map any; } ```

Example: lsusb -v output shows iSerial value: ``` Bus 002 Device 004: ID 2e8a:000a Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1...

No, AD9833 does not support SPWM. For two concurrent signal you'll need two boards.

I wonder if it's related to multiboot. Described in [xtp059.pdf](https://www.xilinx.com/support/documentation/boards_and_kits/xtp059.pdf)

The good news is JTAG loading to the LX100 works fine. So, I wonder if a direct flash erase bitstream created and loaded via JTAG, then could it wipe the...

I replaced the flash with IS25LP064. Still the same behavior - Vref drops on the JTAG thus the flash programming fails. So it's not in the bootloader unless there is...

No luck with the pano button in my case. BTW, I replaced the flash with a new blank IS25LP064. The whole 2.5V power rail drops during the programming. It's done...

I have a Rev C-05...