geofrancis
geofrancis
can you add a bind function now that you have RC and telemetry, just a unique number or word that can be set on TX and RX so that RC...
I was out testing a plane with wifibroadcast on it and forgot to take the HDMI monitor with me so i was just using the video screen on mission planner....
Currently mission planner can only output NMEA GPS data but what would be very useful would be the ability for it to output other NMEA type sensors like: Rangefinder/depth sounder...
#### Issue details at the moment its not possible to trigger aux functions from a joystick unless you assign the function to an analogue channel. There are very few options...
I believe there is an issue with the timers when used with the esp32-s2, the only way I could get it to work was to run it without the timer...
I have a 2wd ebike with a pair of hub motor, a small geared hub on the front and a direct drive on the back, what i would like to...
I dont think this page has been updated in a long time, It talks about APM controllers .
can you get the throttle and engine status from the Xicoy ecy?
can the leak failsafe from ardusub be added to the regular rover firmware so it can be used on boats? Another idea would be to have it in 2 stages,...
I have been upgrading a boat from a Omnibusf4pro to a Matek H743 Wlite. but I have ran into an issue with the i2c bus where setting an address of...