Gaucho

I would like to exactly control the movement of the robot. For this reason i suppose that i have to check the position of the motors coming from the hall...

Sources

3

Some questions: 1)where can I find the sources? Here I see only the zip compiled files 2)is it possible to use canable to make the cheapest immobilizer for cars, by...

Restore hoverboard

6

Is it there a way to restore the hoverboard after playing with this hack?

St32f072c8t - usart

9

I’m on St32f072c8t. I can use only one of these 2 pin to control a ws2812 led strip: PA14 (Alternate functions Usart2_tx and swclk) or PA12 (Alternate functions can_tx, usart_rts,...

Porting to gen2 hoverboards

35

Your work is amazing. I have gen2 hoverboard (the one with 2 boards instead of one) and I would like to be able to restore it with hoverboard functionality. Any...

"connection parameters update request" CALLBACK IS MISSING FROM MBED STACK

12

in repository Bluetooth Low Energy / BLE_API the function updateConnectionParams is returning the error 3 (wrong parameters). This is needed, when in master role, to reply to the parameter update...

help to start to contribute to this application

5

before to start the developement, I would like to know how to decode data received on the serial line. I understood first char (the t) indicates the start, then 3...

First of all congratulations for this piece of code. I would like to evaluate performance of a radar with a simulation over one month. Can I get a one month...

is it possible to use canable to make the cheapest immobilizer for cars, by injecting messages on canbus? I think yes, but why no one made it? You can use...

timestamp not available

3

I'm using Canable with SLCAN firmware timestamp is not sent by canable and it is not shown in savvycan. savvycan just prints timestamp when message is generated by itself. the...