Gary Sargent

> I see this in the logs: "Error setting climate.living_room temperature to {'temperature': 15.0, 'entity_id': ['climate.living_room']}: Error from API: 400: FAILED_PRECONDITION: Device is offline.: Bad Request" I'm not seeing "Device...

Workaround... In developer tools templates, set the template as: `{{ config_entry_id('climate.upstairs') }}` Replacing "climate.upstairs" with the entity ID of one of your Nest devices. You should then get a GUID...

I'm also getting frequent disconnects from my power sockets. I'm on the latest version of MerossLan 5.0.2 I have quite a few devices, all still connected to Meross Cloud, all...

Also just to add I have ping monitoring of all the devices, and they are being pinged every 20 seconds. Every single ping is coming back with a reply -...

@timnolte what do you mean by "blank device key hack"? If I click configure integration in HA, then the "device key" field is filled in for devices that are going...

@galamarco do you have static IP addresses for all your Meross devices? I'd recommend this if not.

@dchesterton how do I install the dev version? I'm currently using the Home Assistant add-in [texecom2mqtt-hassio](https://github.com/dchesterton/texecom2mqtt-hassio) In regards to using a Shelly Uni, it is this device: https://www.shelly.com/products/shelly-uni This can...

@dchesterton unfortunately this didn't work. So when the PANIC zone triggers, the alarm goes into TRIGGERED mode. Then when the zone clears (but the alarm is still sounding) the state...

@dchesterton debug below: ``` 2025-02-27 11:02:37 - PANEL: Audible PA (Areas: A; Parameter: 12; Group: 1) 2025-02-27 11:02:37 - DEBUG: Publishing to texecom2mqtt/log: '{"type":"PAAudible","description":"Audible PA","timestamp":"2025-02-27T11:02:37Z","areas":["A"],"parameter":12,"groupType":1}' (retain: false) 2025-02-27 11:02:37 -...

Just had another crash: ``` 2025-03-03 17:58:07 - DEBUG: Updating system power... 2025-03-03 17:58:07 - DEBUG: Queuing GetSystemPower command (sequence: 93) 2025-03-03 17:58:07 - DEBUG: Updating system power... 2025-03-03 17:58:07...