Niccolo Gallarati

Non-void function with no values returned causes crash

37

Make your question, not a Statement, inclusive. Include all pertinent information: What you are trying to do? While writing firmware, I stumbled in puzzling crashes. This firmware used to work...

Customize popup text style

2

Hi to all, I'm trying to style the popups, which are populated by a GeoJSON features collection. While working directly with LeafletJS, in the OnEachFeature function, I can compose the...

Write bitmap regions of screen from buffer (LVGL)

13

Dear Rudolph, I was able to make Arduino PlatformIO example to work on my test bed composed of ESP32 MCU and a Riverdi EVE3 7" display. I would like to...

Buffer overflow bugs

1

This code is simple and elegant, however it is prone to buffer overflows because it blindly trust Serial inputs coming from the VE.Direct device. The two weaknesses are: 1) When...

SERCOM I2C not working on pins PA08, PA09

15

Hardware platform: Sparkfun SAMD21 Mini Breakout + BME280 sensor + VL53L0X sensor Software platform: Arduino 1.8.3, Arduino SAMD Boards 1.6.20, Sparkfun SAMD21 boards 1.5.3, Windows 10 Pro 1803 Aim: -...

- Arduino board: bare ATMEGA328PB, MiniCore board definition - Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.8 - List the steps to reproduce the problem below (if...

Noise while buffering or recovering after "Lost synchronization"

1

Dear all, I have noticed the MP3 streaming is more stable than last year, when I did the first testing. However it still makes noise while buffering at start and...

MaxPower does not have effect on Channel 1 on SONOFF Dual R3

6

### PROBLEM DESCRIPTION _A clear and concise description of what the problem is._ I have a Sonoff POW Dual R3 running Tasmota 13.4.0(tasmota32)] I set up "MaxPower 300" command to...