gamer123
gamer123
The configuration on the Raspberry is not running in a LXC or LXD container it is running directly in the OS. I try to set up the config on an...
I tried, but I don't get it :D I tried to set the FAN status to 5. According to the APP, 1-5 should be possible. According to my understanding it...
@signalkraft there is missing a GUI input function, but i dont know how to add :| It is working this is the used command: service: mypyllant.set_ventilation_fan_stage target: entity_id: - climate.heizung_ventilation_var_360_4_e_climate...
I also have a Recovair 360/4 with bus coupler and address 2, but it ist working in my case.. but it is useless, because i only can switch beten normal...
Same Problem here since the update to 2023_06 it stoped working.
@torbennehmer hi thanks in my case it is working again. i havn`t tried manual charge bevor the update and also not with the workaround. I do have Tibber (dynamic prices)...
It looks like the value is correct adobted by the integration. "additional-1-total": 35.78, it is the shown value at the picture 0,04 kwh 0,0357 is round up to 0,04. So...
it should be more than 32460.77+3421,87 kwh =35882,64 kwh so it could be also a shifted bei 10.000.000
The installed Battery capacity is also different installed in this case 42kwh system tell´s 62 kwh and in homeassistant entiy it is shown as 0,06200000001. This is the same problem...
From my point of view it is very important to have this feature for RaspberryMatic Addon to use the better IP wired devices. I do have a full testbench and...