fu-zhou
fu-zhou
> Als Workaround zuerst die **vis-google-fonts** installieren(zu finden unter Adapter), dann klappt auch das Update Hat funktioniert!
I have the same situation: The sensor is sending a single pulse (4 seconds long though as the mirror turns slowly, but a clear edge is being recognized), so no...
I actually figured out that I was using "pulse_counter" while derwolff was using "pulse_meter". So I did not try your suggestion but I moved to "pulse_meter" and it now seems...
mqtt.0.ess.common.BATT.status: 0=stand by 1=charging 2=discharging more to follow...
I got my update this morning (ESS Home 8) and I had to reset the inverter to factory settings in order to access the installer settings in the EnervuApp again....
I can tell you a story... I commissioned my system 4 months ago in May and have opened several cases since then - finally ending up with a firmware from...
Today I figured out that a new firmware has been pushed onto my system  No obvious changes from what I can tell up to now, just wanted to let...
Well, maybe the 5 kW system was brought on the market thouroughly tested and fully working, so no need to upgrade while the bigger ones like I have one are...
Hi again, I wanted to ask if it's possible yet to change the battery charging mode through mqtt? I figured out that charging depending on the weather forecast may end...