freakyDude

icon indicating a website link https://www.freakydu.de icon indicating an email [email protected]

icon company freakyDude icon location Nuremberg icon location I'm a full-stack software developer with a lot of interests. Currently I'm working on some projects around 3d printing in my spare time.

Results 4 issues of freakyDude

Add Artillery Sidewinder X2 2022 stock printer.cfg

6 comment

Hey guys, after many hours of testing I like to add my Artillery Sidewinder X2 printer config, because there is no example in this repository. Its for the unmodified stock...

pending feedback

Support for Raspberry CM5 ?

43 comment

Hi there, Does the Manta M8P V2.0 support the new Raspberry CM5 compute module? It is hardware compatible but has a slightly different GPIO configuration. See https://datasheets.raspberrypi.com/cm5/cm5-datasheet.pdf -> Appendix C:...

Tool "Place on face" must used twice

2 comment

### Description of the bug When using the "Place on Face" function on a flat face - you have to click twice to get a complete placement, which is annoying....

Coordinates

Print Quality Issues on Small Angle Surfaces (10°) Caused by Infill Handling

4 comment

### Description of the bug On surfaces with small angles (e.g. 10°), PrusaSlicer 2.9.2 produces significant print quality issues due to the way unsupported layers above infill/support structures are generated....