Frank Horvath

Currently, we support protocol configuration for only one of the SNMP versions (v1, v2c or v3) per device instance. It turned out, that it would be practical to support multiple...

The service must be able to run even without any argument provided at the command line (the default behavior). The CLI part of the service needs to be implemented in...

Device group creation (all the existing device fields, but the IP and port can be defined as range) Modify device group Delete device group Start device group Stop device group...

Implement the BulkRequest operation according to the corresponding RFC BulkRequest operation was introduced by the SNMP v2 RFC3416 => ignored for SNMP v1 - [ ] SNMP v2 BulkRequest [RFC3416](https://datatracker.ietf.org/doc/html/rfc3416#section-4.2.3)...

Implement the InformRequest operation according to the corresponding RFC - [ ] SNMP v2 InformRequest handler [RFC3416](https://datatracker.ietf.org/doc/html/rfc3416#section-4.2.7) - [ ] SNMP v3 InformRequest handler - [ ] Integration tests

Implement the SetRequest operation according to the corresponding RFC - [ ] SNMP v1 SetRequest [RFC1157](https://datatracker.ietf.org/doc/html/rfc1157#section-4.1.5) - [ ] SNMP v2 SetRequest [RFC3416](https://datatracker.ietf.org/doc/html/rfc3416#section-4.2.5) - [ ] Integration tests