fpaterra

I'm having this same problem. I've tried different Pico and I'm able to start OpenOCD with picoprope loaded on a non-W pico connected to a non-W pico but when I...

> @fpaterra AFAIK that should work fine - have you double-checked your wiring? Thanks for your reply @lurch. I have doubled checked and had other look over them as well....

Interesting. When I connect a Pico Debugger Probe (https://www.raspberrypi.com/documentation/microcontrollers/debug-probe.html) and run the same openocd command: ```$ openocd -d -f interface/cmsis-dap.cfg -f target/rp2040.cfg -c "adapter speed 5000"``` I get a similar...

OK more in the saga. On a whim I attached the USB to power and now things are working using the pico debugger probe. I had tried that with the...

I was not able to get it to work, I think something changed and there is an incompatibility with PicoProbe on a pico (non-w or w) targeting a pico-w. I...