foxy82
foxy82
Snapcast spins up it's own copy of airport sync so will be running inside the snapcast process - I guess this is how it uses stdout. I'll see if I...
I've just tried this and it is in fact --with-stdout that we need. I used this config line locally: ``` ./configure --sysconfdir=/etc --with-alsa --with-soxr --with-avahi --with-ssl=openssl --with-systemd --with-metadata --with-stdout ```...
I'm running on proxmox - my final plan is to pass this through to an lxc container. However to keep things simple for now I'm running on the bare host....
> From what I see here, the issue is with hardware. `lspci` should show two `System peripheral: Global Unichip Corp. Coral Edge TPU` lines, because TPUs are independent > >...
This also happens on playing / pausing. Checkign the SPOCON log there isn't anything obvious.
Sorry coming back to this - I tried them all and none of them represent the icon above.
I fixed this by powering the TV off at the wall and then when it came back on it worked.
I had this problem using a cheap mini pc as the HDMI input. With the cheap mini PC if I ran the script piped into ffplay nothing would show and...
Not sure if it is the same as the issue here: https://github.com/benjojo/de-ip-hdmi/issues/15 As I posted there changing to a different source helped for me.
My system has gone from stable to almost unusable in the last few releases. I strongly suspect it is related to the number of workers. A 433mhz button that fires...