formtapez
formtapez
Did you connected the sensor like this? 
Technically, that's possible. https://github.com/formtapez/ZigUP/blob/master/Datasheets/CC2530%20User%20Guide.pdf Look at table on page 81 to find a pin for a timer compare output pin, which was unused before.
I don't know that yet. Do you have a good use-case for that? What do you want to control, and how?
Der ist zur Spannungsstabilisierung während das Relais umschaltet. Vermutlich könnte es aber auch ein kleinerer sein.
Copy the "src/ZigUP" folder from the git-repository to your Z-Stack installation folder so it looks like this: \Projects\zstack\HomeAutomation\ZigUP\ In that folder start CC2530DB\ZigUP.eww to load the project in IAR. In...
Look at the last picture. The "LED" Pin. (P1.6 / MOSI)
Just look at the schematic. P1.3 for the main key P2.0 for alternative key https://raw.githubusercontent.com/formtapez/ZigUP/master/Layout/Images/schematic.png
Send "{"led":"toggle"}" (or on/off instead of toggle) to your "set" topic. For the WS2812 tape use {"light_color":"..."} for the "set" topic. You can use several parameter formats for that (see...
Cluster 'genOnOff' is only used for the relais. You dont have to care about the cluster - zigbee2mqtt chooses the right one depending of the command. Maybe your version is...
Hi, you are right, these two components are really not cheap. I chose the Meanwell power supply for safety reasons. For something which is on mains 24/7 even when nobody...