Max
This should prevent the race conditions when destroying and initializing multiple threadpools at the same time Also see #88
STM32 Discovery have microphone soldered. Idea for demo: * read audio data from mic * write it to cs43l22 codec Dependencies: * [ ] #391 - Mic driver
Must include: * documentation page * unit tests See also: http://www.st.com/en/audio-ics/mp45dt02-m.html
EXTI driver must be added to KE02 platform. Reference implementation: https://github.com/forGGe/theCore/blob/develop/platform/tm4c/exti_manager.cpp Depends on #230
Continuation of #229 KE02 platform UART must be extended with listen mode, similar to stm32 (#226) Example must be created (most likely based on HM-10) to illustrate usage of the...
Reference implementation: https://github.com/forGGe/theCore/blob/develop/platform/tm4c/export/platform/gpio_device.hpp Roadmap: - [ ] Implementation - [ ] Documentation - [ ] LED example Depends on #230
Thin abstraction layer should be created on top of platform interfaces to provide an interface to control analog IR devices. Mentioned IR12-21C/TR8 and PT12-21C/TR8 are present in FRDM-KE02Z board. Roadmap:...
The MMA8451Q is a smart, low-power, three-axis, capacitive, micromachined accelerometer with 14 bits of resolution. It uses I2C to communicate with MCU. The MMA8451Q is placed on FRDM-KE02Z board, so...
Similar to other platforms, I2C must be implemented on KE02 as well. Reference implementation: https://github.com/forGGe/theCore/blob/develop/platform/stm32/export/aux/i2c_bus.hpp Depends: - [ ] #230 KE02 platform support
The hello-world example is introduced with Ke02 platform support in #230 (see PR #377 ). The KE02 example must be exteneded with support for `tcore` scripts, in a same manner...