Francesco Montefoschi

Hi. I've got the same issue, draggabilly does not work if autoClose is enabled. Is this still a work in progress? Thank you!

Thank you Michal for your feedback. Have a nice vacation, Francesco

That issue if fixed on my kernel: https://github.com/fmntf/linux_kernel/commit/0dffbfaa5b5877ec32bd31c709eefe1e8c713358

Tomorrow I will try to rebuild it. I also have a newever kernel (4.1.15_2.0.0) on another computer, but I have forgotten to push it to GitHub. Probably newer compilers broke...

Please try to build this branch: https://github.com/fmntf/linux_kernel/tree/4.1.15_2.x-udoo It contains fixes for GCC 6 make mrproper ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make udoo_neo_defconfig ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make imx6sx-udoo-neo-{basic,basicks,extended,full}{-hdmi,-lvds7,-lvds15,}{-m4,}.dtb zImage modules firmware -j8

Sorry, in the directory where I have built 4.1.15-2.0.0 I had some uncommitted changes (an initial draft of ttyMCC on 4.1). Btw, if you disable ttyMCC from defconfig you should...

Hi guys. `no-1-8-v;` was removed by mistake. I will bring it back, thank you for noticing! (Pull requests are welcome) The SD card runs at 3.3V only. You can verify...

Remember there is no M4 communication support on this kernel. I don't even know if M4 can boot at all, I did not verify the shared memory pools.

Yeah, I know. But since it is not complete, we cannot move it on the official UDOO repo. If you are interested there is an Ubuntu 16.04 image with this...

Hi; don't know.. that script should not be used. I directly use mqx_upload_on_m4SoloX. In fact, in Android there is only mqx_upload_on_m4SoloX and not udooneo-m4uploader.