Signor Pellegrino

``` setenv ipaddr 192.168.1.51; setenv serverip 192.168.1.72; saveenv setenv bootargs 'mem=128M gmmem=90M console=ttyS0,115200 user_debug=31 root=/dev/mtdblock3 init=/init rootfstype=squashfs mtdparts=nor-flash:256k(boot),64k(env),2048k(kernel),5120k(rootfs),-(rootfs_data)'; saveenv setenv bootcmd 'setenv setargs setenv bootargs ${bootargs}; run setargs; sf probe...

Good afternoon Thank you for your interest in our project. Unfortunately, at the moment we do not have free specialists and resources to solve your problems.

Good afternoon Thank you very much for your suggestion. We as a team will think about it, read the documentation and I will contact you a little later.

I wrote you some questions in PM Telegram, please post as you get a chance.

I made a small crutch with imx138 since we don't have a driver. Not sure if it will work well but it breathes nonetheless... ;) https://openipc.org/snapshots/368807 In the future, if...

The problem is in the wifi driver. It needs to be rebuilt with the new toolchain and archived. This should be done by someone who has such a camera in...

The ipctool is a cloud utility, it is pulled from GitHub. Just run the command on a camera with internet and it will be available. Its smaller brother, ipcinfo, is...

You can download the utility to an SD card and use launching from it. https://github.com/OpenIPC/ipctool/releases/tag/latest Also pay attention to the GPIO table https://wiki.openipc.org/en/gpio-settings.html

Good afternoon You can't do that, the drivers are incompatible.

> Thanks for support, so it won't work , the new drivers no chance to be developed? You need to study what kind of device and firmware you have. In...