Proton
抱歉…… 这边没用到过交换机，就没有集成这个。 因为 tag 的格式已经变化了，所以暂时没法用……
@songjave 麻烦看看 swcollector 分支，做过移植了，但是我没有交换机，没法测试，如果能帮忙测试下那真是很感谢~ 正常的 build 过程会生成 `/tmp/go-github/swcollector` 文件，然后将下面的 json 自己做修改，保存成 cfg.json ```json [ { "interval": 30, "snmpCommunity": "public", "logFile": "/dev/stderr", "ignore": [ "unknownprotos" ], "ipRange": [ "127.0.0.1" ] }...
satori 的 agent 还需要管理插件、以及从 master 拿到所需要执行的插件的列表，这些东西跟整个 satori 都是结合紧密的，没办法简单替换。 会尝试将 telegraf 移植过来，作为一个插件使用。 另外，既然很喜欢 telegraf 的话，可以直接调研一下他们的 TICK 栈吧，比这样蹩脚地组合起来要好一点。
你这边是不想单机部署么？ 因为这边暂时没有分机器部署的需求，所以可能不会很快的花时间去写，之前的 issue 里给了你群号，加一下一起讨论吧
This may be prohibitively expensive at the moment so I'm planning to enable it after the refactor of build pipeline and adding new buildbots.
Hi, did you setup your CUDA environment following [this](https://docs.nvidia.com/cuda/wsl-user-guide/index.html#installing-nvidia-drivers)? In a clean Ubuntu installation CUDA will not work out of the box.
The machine powered off and on, had no effect.
HOLY SHIT I'M SO LUCKY! Your code assumes PHY capabilities struct to be 0xC long, which does not hold true to my NIC(mine has 0xD), so only the first word...
> @feisuzhu Any insight you can share here? I got as far as above and got the PHY but I don't get how you fixed it finally by saying you...
@hawaiik Yes, and please don't follow my experience blindly, confirm yourself.