fbbln

Logs attached. I removed private info from the logs (IP, usr). After setting up the alarm as above the temp readings are as follows   Alarm did not fire...

[log_no-temp-alarm.log](https://github.com/vitormhenrique/OctoPrint-Enclosure/files/4170417/log_no-temp-alarm.log) [log_temp-alarm.log](https://github.com/vitormhenrique/OctoPrint-Enclosure/files/4170418/log_temp-alarm.log)

This issue occurs only if the dateFormat option is used. If the input format (as specified by dateFormat) is left as default YYYY-mm-dd everything is shown correctly. As a workaround...

Was there any solution to this or a an answer somewhere on the HA community?

This seems to be still open, although the mention is closed. Pushing this up...

I'd love to help out and contribute, but I have not worked on Android projects before and I'm rather unfamiliar with C++ (more C and Python). Yet, if someone is...

+1 I also had the experience for example in Italy and Croatia where traffic controlers like to send you from one IFR point to the next. Showing them could be...

Any further info how to flash a V1.2 board with SX1262 correctly? Is there a new FW included in 2.0-pre?

@alexanderdross I'm not sure I understand. The first link goes to the list of TTGO FW files which can be installed from stratux, but they do not seem to fit....

Despite these error messages it seems to work now. I get a good GPS solution (with an external antenna) and it transmits OGN ID. Now I only need to find...