kalman13
kalman13
Has anyone used this software with the Anafi?
@espetro , thanks for the quick reply. And what about ROS 1 ? Also, could you point me to the code you used for interfacing ROS2 with the Anafi ?
@MaxSmith13, I was working with a colleague on this. He told me: I ended up using Olympe inside my own ROS node, which was part of the reason to look...
@Voidminded Could you confirm that you are able to access the GPS data at 5Hz on the Bebop?
@dalas10 in the documentation [here](http://bebop-autonomy.readthedocs.io/en/latest/) there is written: Support for Parrot Disco FPV | No | Not tested (help wanted) So I don't think it is supported yet. Also, if...
Just to be clear, if anyone will experience in the future this error, you should: - delete the old version of DCNv2 - check which version of pytorch you have...
> > Is your user root or individual user, if it is an individual user, please add --user in make.sh @starsky68, could you please be more precise about your statement?...
> I resolved this issue by forcing `python setup.py build develop` go through > > https://github.com/CharlesShang/DCNv2/blob/c7f778f28b84c66d3af2bf16f19148a07051dac1/setup.py#L34-L42 @allenwu5 , thanks for posting your solution. I tried to replicate it and understood...
After some research, I understood that the problem was that I actually did not have CUDA installed. You can find it out by doing: `nvcc –V ` If nothing is...
@BruceYu-Bit , @zpge , @Keiku any news on this?