fableman73

--- Cross-compile it on some potential system what files do I need to transfer ? --- or be patient to finish. The system hangs and is unresponsive after 30 minutes.

After 5 hours waiting I gave up,, the RPi Zero W2 can't install.. Then I did this: ``` export SKIP_CYTHON=false pip install mppsolar[ble] Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Collecting mppsolar[ble]...

I now installed Python 3.12 and reinstalled mppsolar. `root@husb:~# python -m pip install mppsolar[ble]` ``` Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple Collecting mppsolar[ble] Using cached https://www.piwheels.org/simple/mppsolar/mppsolar-0.16.29-py3-none-any.whl (229 kB) Collecting bleak=0.20.2 (from...

Its not compatible with python 3.12 ?

> > 8MB/s is ~5300 1.5KB packets per second, so 6000 interrupts sounds reasonable. > > Makes sense. But there is still high CPU load by `kworker/u9:3+brcmf_wq/mmc1:0001:1 ` which does...

> That's a red herring the Zero 2 W doesn't use the BT_HOST_WAKE signal (it's not connected), and the DTS doesn't declare the interrupt source. The interrupts which are being...

but that last suggestion took 20% down to 0.5% sounds good at least.

Lots of interrupt doesn't have to generate high CPU load , feels like very bad handling on interrupts / bad coding. guy even removed this interuthandling from the kernel and...

I have the same lag using ssh and The CPU gets very warm and everything feel so slow.

I have a linux based router from Teltonika. I did a speed test from my laptop and pushed 380 Mbit and I noticed a small peek at 25% for a...