evils
evils
the behaviour did change with the firmware update the first use of `cargo run` results in a successful flashing and connection to RTT (with the probe blinking red-green throughout) ctrl-c...
as i have never used this application, i'm probably not the best person to advice on a solution CMAKE_INSTALL_BINDIR, if supplied should definitely be respected and used as a path...
> is the checkbox 'Package updates' applicable? it is a package update, and i added a release note for all major or breaking changes (for me, as it should for...
resolved merge conflict @zvecr does your self-assignment to this mean you have a plan for the changes?
@zvecr it's been 3 weeks since you assigned yourself to this, do you have a plan for the changes or should i just cut out the SPLIT_HAND_PIN part, which seems...
@zvecr it's been 44 days since you assigned yourself to this, was that by mistake? i've resolved another merge conflict
nice article, thanks my symptoms are different though, both halves work perfectly on their own and connecting the TRRS cable has no effect on that i will double check the...
turns out my `GP0` is shorted to GND somewhere currently i'm assuming this is ESD damage in the RP2040 as i can't find any shorts the pico board is glued...
didn't get bitbanging half duplex going on the pico but i had a spare, so i swapped it out and now everything works :D working on opening a PR for...
this appears to be fixed in 0.6.8