euclas

Hi, It's the same directory: C:\Program Files\Arduino What about the ServerCompilerSettings.ini file? Is it in the same directory as ardublockly_run.bat? Or in the ardublockly.exe directory? I need a Blockly converter...

Hi Carlos. Exactly: [image: Imagem inline 1] I would like to test at least the basics, in the Arduino IDE (COM11, and Arduino Mega 2560) works correctly. Thank you again...

Pois é... Python e Mojo e qualquer outra brincadeira vão ficar no aguardo enquanto não colocarem isso. Até lá, por serem código aberto... se alguem "inventar" de fazer, nem que...

Great! Initially and if possible look at the card I sent to manufacturing and see if there is any impediment to use it along with the recorder (PICkit3). Attached. With...

Hi. To program the PIC32MX795F512 is only done through the SD card? There is no minimum circuit that can be mounted so that you can take a test? Only using...

Was this part of the circuit enough to program the firmware in the pic? (Continues after drawing). [image: Imagem inline 1] After mounting the SD card:... [image: Imagem inline 2]...

Yes. I understood that the Bootloader is programmed by ICSP. And the program in Lua is loaded via the SD card containing the BOOT32.LUA script. Correct? 2015-05-22 18:46 GMT-03:00 FMMT666...

Hi. I am in Brazil, I made contact with Professor Roberto Ierusalimschy (creator of the language). I wonder if you know any Brazilian who is using PIC32LUA? Thereby see support...

Hi. At first my problem is to make the PIC32LUA be installed on the board, but do not want to use the PICkit 32. I want to develop my card...

I'm sorry. I did not show the card I sent you to prototype manufacture the plate I want to finally draw. All pins are available to do tests. Except the...