Piotr Esden-Tempski

The diff between the two implementations is pretty large. I don't have the time to do the merge work myself at the moment. If you are willing to do the...

The nord theme that I submitted is actually desigend by @jordiorlando I only did some conversion to add it here. I think the approval and credit should go to him....

So is this done now? Are we happy with this?

For reference I have created a repository with "converted" examples. https://github.com/icebreaker-fpga/icebreaker-icestudio-examples Over time I would like to adapt those examples to be better suited to the iCEBreaker board. We don't...

## Decide on LVDS connector alignment hole size The part that we have sourced for the production of Glasgow revC3 has a smaller alignment pin than alternative models. This results...

## Fix reset button part number Fixed in commit 84810727408d623672fd89c878565682f2e92de3 the full part number is `TC-1109DE-B-F`.

## Decide on resistor pack footprint spacing The current footprint is based on the Samsung recommended footprint dimensions.  https://www.samsungsem.com/resources/file/global/support/product_catalog/Chip_Resistor.pdf The `RP104P` is the `0402x4` package type. The strange part...

## Schematics+BOM: adapt LEDs and LED-resistors Resolved with: bd0d5b1d4d3006b3629e85382b80c47547cc3e1b

## Decide on LVDS connector alignment hole size Changed to 0.76mm diameter holes, and removed pad chamfers that are not needed any more in: ae8d47c5f9998be509b4eca82c461dd58cf31335

Just for added information. I just ran into this issue too. The `pins-int` selftest consistently results in: ``` E: g.applet.internal.selftest: self-test: FAIL E: g.applet.internal.selftest: pins-int: fail high: A0 A1 A2...