erosenst

I think I can help to bring access for canon lbp7200c. Sending unit is maybe too expensive, but I own some public ip:s so I can setup some amd64 machine...

Are there any information how tablegen *.td files should construct? It seems quite hard to learn from ARM/X86 sources how write files correctly to C28x 32-bit mcu.. Any help material?...

Thank you for reply. I found by strace that it looks input file in same directory and ln -s library file to working dir.'tape20' Then it run test run.. (removed...

> Is input syntax changed in njoy21 or what is wrong? That was just case. njoy21 have ten variables in thermr card 2:

Hello, it seems to be fixed width PWM with every 9th pair is same up/down time and are separator. (seems my example have corrupt, need change up/down chars to different....

It is syn115 ASK,. It is over mfg limit 10kbs by 10x but their limit is moustly from receiver part. Need check can syn115 do that speed, seems that it...

D [21/Feb/2022:10:01:32 +0200] [Job 40] Connected to printer. D [21/Feb/2022:10:01:32 +0200] [Job 40] Connected to 192.168.0.215:9100... D [21/Feb/2022:10:01:32 +0200] [Job 40] backendRunLoop(print_fd=0, device_fd=6, snmp_fd=5, addr=0x5564f27949e8, use_bc=1, side_cb=0x5564f2124360) D [21/Feb/2022:10:01:32 +0200]...

There is canon official driver log piece if it helps, dosn't work but.. If you have idea how to run pstocapt3 directly and got more verbosity then post message ;)...

There is wireshark dump from job 43 from canon official if it helps.. ma 21. helmik. 2022 klo 11.08 Eerin Rosenström ***@***.***) kirjoitti: > There is canon official driver log...