elral

Static Web Page on a NAS

1

First, thank you for this project. I installed it on a Raspberry Pi 4 after trying other solutions for receiving NOAA satellites made by myself and what I found in...

**Describe the bug** One or both I2C pins can be double used. In this case the LCD and/or the device does not work properbly. **Steps To Reproduce** Open Mobiflight modules...

Custom Device without any pins results gives an error message

1

**Describe the bug** If a custom FW is set up and in the device.json file and no pin is defined and it is not an I2C device, the connector reports...

Add community device miniOverheadPanel

3

This PR adds the required files within the `/community` folder for the miniOverheadPanel from MadMonkey.

Community device GNC255

2

This PR adds the required files within the /community folder for the GNC255 from Tuomas.

I am using a display with SSD1963 driver in 8 bit parallel mode connected to a Pico. If I write directly to the display via `tft->setTextColor(TFT_YELLOW);` and e.g. `tft->drawString("Test", 100,...

We are using this lib for the Pico RP2040 (and inofficially for ESP32, Teensy, ...) to get an unique identifier. Two weeks ago a added support for the Pimoroni PGA2350...