ellensp

GSTAT – Global status flags 1: Indicates that the IC has been reset since the last read access to GSTAT Ie you had a power glitch

error is clear "Only ZONESTAR_LCD, MKS_MINI_12864, ENDER2_STOCKDISPLAY, and CR10_STOCKDISPLAY are currently supported on the BTT_SKR_E3_TURBO." You apparently tried to enable some other type of display

If you saw the pin file then you also saw that FAN1 is directly connected to power and is not software controllable. So you cannot use the FAN1 plug. You...

I completely didn't seen fan2. But yes it is also just power and gnd, no software control on that one either.. There are ways around this. Add external mosfets etc....

you need to enable it. bridge the kill jumper

All posts in Marlin github are already re posted in discord channels. I have some concerns, 1) who will maintain it once your board of it? (this is inevitable) 2)...

It looks like this at present. 

@duchengyao Yet another undocumented motherboard form Creality using a STM32F401RC, no source code provided even though it a requirement to use Marlin. So no pins files... Nothing to work from....

@Jhendrix0875 This Issue Queue is for Marlin bug reports and development-related issues, and we prefer not to handle user-support questions here. (As noted on [this page](https://github.com/MarlinFirmware/Marlin/blob/2.0.x/.github/contributing.md#i-dont-want-to-read-this-whole-thing-i-just-have-a-question).) For best results getting...

https://github.com/makerbase-mks/Marlin-V2.X-MKS-H43 is a fork of marlin. Suck back at version 020008 Please test the [`bugfix-2.1.x` branch](https://github.com/MarlinFirmware/Marlin/archive/bugfix-2.1.x.zip) to see where it stands. If the problem has been resolved then we can...