Electronic Eel
Electronic Eel
Strange, I used exactly these files for ordering. Can it be that the files got corrupted during download? Please try downloading the whole repository using git clone instead of just...
For more complex stuff like microcontrollers or FTDI232 I prefer small breakout boards which already have the important footprints, like capacitors, crystals,... on them. But if you are using a...
I will update this once #242 is merged.
> This will only produce sensible results for a periodic / stable signal. Just an idea: add a feature to also report maximum deviation to give the user an idea...
> Traceback (most recent call last): > File "", line 1, in > File "/usr/lib/python3/dist-packages/bitarray/__init__.py", line 11, in > from bitarray._bitarray import _bitarray, bitdiff, bits2bytes, _sysinfo > ModuleNotFoundError: No module...
@esden While reviewing the changes to revC2 since the prototypes I found these issues: ### 1. LVDS alignment holes You mentioned that the LVDS connector alignment holes are quite large...
@esden I found another thing that I'm not sure about: The new footprint for the resistor packs (R_Array_Convex_4x0402) has unequal spacing between the pads. The inner pads have 0.2 mm...
@smunaut I added a 4.7 µF cap to VIO_AUX now, because adding 1 µF would have meant adding a new BOM line, as we don't have 1 µF yet. Unfortunately...
> And location will have to do. That's a rather crowded area and the 'clkref' line splitting the line and also going across the whole reference plane for half the...
The mentioned issues should be resolved now