Adrian Schnyder

I had the same problem. The solution is the following entry in the platformio.ini upload_flags = -e -e means to erease the memory before the upload

I have the same problem with different ESP32_S3 boards and the SPI SD Card Module: [SPI SD](https://www.aliexpress.com/item/32877331401.html?spm=a2g0o.order_list.order_list_main.60.21ef1802yrqoKj ) With the old boards like ESP32-D0WDQ6 everything works perfectly. However, when I...

Problem solved. Adapter created according to this information: [https://mischianti.org/how-to-use-sd-card-with-esp32-2/](https://mischianti.org/how-to-use-sd-card-with-esp32-2/) Now everything works perfectly. I measured the ports with the oscilloscope and they all have a high voltage of 3.2V -...

You're right, it might have been better to open a new thread, I apologize. I tested the following types and all could be written and read successfully: - eekoo MicroSD...

Thank you for your reply. It might be a good idea to change the language if it isn't already correctly selected. I have a German installation; the video played in...