ehong-tl

getApbFrequency() return 80MHz even though CPU < 80 MHz on ESP32-S3

2

### Board ESP32-S3-DevKitC-1-N8R8 ### Device Description None ### Hardware Configuration None ### Version v2.0.3 ### IDE Name Arduino IDE ### Operating System Windows 10 ### Flash frequency 80MHz ### PSRAM...

1. Added method to set SSL profile for proper secure client connection settings for Ublox modem 2. Added method to enable Direct Link mode for Ublox modem for faster transmission...

External trigger example gives error when trigger pin is pulled high

9

Hi, I'm using MT9N001 camera with USB2 shield board. I've trouble capturing image using external trigger image capture example in new SDK. I keep getting alternating error as follows each...

[BUG] {Unable to get IMU data rate > 100 Hz when rotation is enabled}

5

**Describe the bug** Unable to get IMU data rate of more than 100 Hz from OAK-D-PRO-W when rotation is enabled. **Expected behavior** To get IMU data rate as intended in...

Latest Ironsides SDK version

1

May I know what is the latest Ironsides SDK version? Because recently I just saw a new paper regarding on perceptin visual inertial odometry system using points and lines features...

Added explicit settings to control segmented write length and delay

3

Added a method to set the maximum data length to be written into the network buffer in segments, as well as a method to set the delay between each successive...