Ed Williams
Ed Williams
I just bricked my SECOND SKR 1.4 Turbo board with the this same issue. I load the firmware, do a few tests - works fine. Then a few boots down...
So what is the commonality here? I was using Marlin 2.0.x, but as an experiment I tried the 7 month old Marlin on BTT's site. I only changed the TMC2130...
@wprojects Seems like my problem is simpler as I only had a communication problem. The board was booting (into a boot loop!) but wasn't talking to me.
@Flapstaart If it is the same, in my case TH0 had shorted internally. Marlin interprets this as a thermal runaway on the hotend and shuts down the board, causing an...
The reason the Mac would not connect is that TH0 developed a short. This gave a MAX_TEMP error which shuts the board down and causing an endless boot-loop.
null-shape-sample.FCStd.gz unzips to a folder, not a FCStd file, so can't open it.
zip file works gz didn't. I notice that it works with a reduced number of letters - despite the error messages. Add one more letter to the 'abcdefg' Shapestring in...
Perhaps this should assigned to someone else?
> IMHO Expression do the job without more work. How do you do that? Suppose I want to make one line's length, say, 5 times that of another, leaving the...
See [https://forum.freecad.org/viewtopic.php?p=599512#p599512](url) I think there's a potential problem with self-referential expressions in the sketcher. Here's a simpler example of my construction than in the thread. You first set the two...