Eduard Shaid

AT commands on ESP32-S2-KALUGA1

2

How can I enable AT commands on ESP32-S2-KALUGA1 debug via UART1 port of ESP32-S2 ? I am trying to install : CONFIG_AT_UART_PORT_TX_PIN_DEFAULT 43 CONFIG_AT_UART_PORT_RX_PIN_DEFAULT 44 so that it would be...

HDLC for framed transport

2

The transfer of the frame is done primitively, for the serial device will not do !!! We need to introduce something like HDLC.

nng on the POSIX platform of Azure RTOS

2

Can someone tell if the nng project can work on the POSIX platform of Azure RTOS ?

last Espressif-IDE v2.6.0 with errors

2

After installing Espressif-IDE v2.6.0 it is impossible to work with the product: 1. the process of downloading to Flash is not shown 2. if the volume loaded into Flash is...

использование SMS в качестве резервного канала передачи транспортного уровня

1

Согласно ГОСТ 33465-2015 возможно использование SMS в качестве резервного канала передачи транспортного уровня.(п. 5.7.1). Кроме того, в случае, если размер пакета данных протокола превышает 140 байт, используется механизм конкатенации SMS-сообщений...

ESP8266EX_Demo_Board: no exchange of AT commands via USB

8

### Answers checklist - [X] I have read the documentation [ESP-AT Programming Guide](https://docs.espressif.com/projects/esp-at/en/latest/) and the issue is not addressed there. - [X] I have used the latest released firmware or...

Is it planned to make RPC for MRAA as is IIOD for LIBIIO Analog Device? Or are there third party solutions that can be used to work remotely with MRAA?...

STM32MP13x processor

1

Will NuttX support the STM32MP13x processor architecture?

There's something wrong with PHONEBOOK

9

There's something wrong with PHONEBOOK. When I try to change memory phonebook, for example, to ME, lwcell_pb_list(LWCELL_MEM_ME, 1, pb_entries, LWCELL_ARRAYSIZE(pb_entries), &pb_entries_read, NULL, NULL, 1); the command to change memory phonebook...

export to scxml file

4

Is there in xstate-tools an export to scxml file?